Servicing Dont Forget Time and Km's. If your Bike is not doing the K's it still needs to be Serviced !
|
Townsville Custom Cycles has the ability to perform services on all models of Harley-Davidsons including Buell and Metric V-Twins to manufacturer's specs, using Harley-Davidson Trained Technicians who have experience on Japanese and European Motorcycles as well specilizing in BIG Cube S&S Motors.
Complete engine rebuilds take place in our Engine Clean Room, using specialist tools and machine shop facilities to achieve the highest standards of reliability seen in the North. The only one of its kind in Townsville for Harley-Davidsons.
Performance upgrades that create reliable Horsepower. We have the ability and passion to look after your steed like it was one of our own bikes, this is what we are about!
Planned maintenance & servicing is the main focus here atT.C.C. The culture here is ride hard on reliable cool looking bikes, that don't draw the crab's and enjoy life, Because it can be way to short!
Look after your bike and it will look after you!
We all know that with regular maintenance your Harley-Davidson™ will not let you down and perform better.
This is a fact, Regular Maintenance is the Key!
There are three levels of regular maintenance. *They are:
Minor Service | Full Service | Major Service | |
Change engine oil and filter.
- Inspect air cleaner, service as required.
- Check rear belt adjustment.
- Inspect transmission lubricant.
- Inspect primary chain adjustment.
- Inspect brake pad linings and discs for wear.
- Inspect oil lines and brake system for leaks.
- Check, adjust operation of enrichener, throttle control.
- Inspect fuel valve, lines and fittings for leaks.
- Check operation of all electrical equipment & switches.
- Check battery and clean connections.
- Check tire pressure and inspect tread.
- Road test.
|
Change engine oil and filter.
- Inspect air cleaner, service as required.
- Change primary chaincase lube and clean drain plug.
- Check and adjust rear belt.
- Adjust primary chain.
- Clutch adjustment.
- Change transmission lubricant and clean drain plug.
- Inspect brake pad linings and discs for wear.
- Check brake fluid reservoir levels and condition.
- Inspect oil lines and brake system for leaks.
- Lubricate front brake hand lever, throttle control cables, clutch control cables (and hand lever), rear brake pedal bushing (if applicable).
- Check steering head bearings.
- Check, adjust operation of enrichener, throttle control.
- Inspect fuel valve, lines and fittings for leaks.
- Check operation of all electrical equipment & switches.
- Check battery and clean connections.
- Inspect spark plugs.
- Check tire pressure and inspect tread.
- Check wheel spoke tightness.
- Lubricate hinges, latches - fuel door, tour-pak, saddlebags.
- Check tightness of all critical fasteners: hand controls, brake system, axle nuts, front fork components, riser and handle bar fasteners.
- Check engine idle speed.
- Road test.
|
Change engine oil and filter.
- Inspect air cleaner, service as required.
- Change primary chaincase lube and clean drain plug.
- Check and adjust rear belt.
- Adjust primary chain.
- Clutch adjustment.
- Change transmission lubricant and clean drain plug.
- Inspect brake pad linings and discs for wear.
- Check brake fluid reservoir levels and condition.
- Inspect oil lines and brake system for leaks.
- Lubricate front brake hand lever, throttle control cables, clutch control cables (and hand lever), rear brake pedal bushing (if applicable).
- Lubricate jiffy stand.
- Lubricate and adjust steering head bearings.
- Check, adjust operation of enrichener, throttle control.
- Inspect fuel valve, lines and fittings for leaks.
- Clean fuel tank filter screen.
- Check operation of all electrical equipment & switches.
- Check battery and clean connections.
- Change spark plugs.
- Check tire pressure and inspect tread.
- Check wheel spoke tightness.
- Change front fork oil.
- Repack rear fork bearings (if applicable).
- Adjust springer rocker bearings.
- Check tightness of all critical fasteners: hand controls, brake system, axle nuts, front fork components, riser and handle bar fasteners.
- Lubricate hinges, latches - fuel door, tour-pak, saddlebags.
- Check engine idle speed.
- Road test.
|
Harley-Davidson™ specifies maintenance requirements as follows.
2003 and Earlier
1,600 km
4,000 km
8,000 km
12,000 km
16,000 km
20,000 km
24,000 km
28,000 km
32,000 km | Initial Service
Quick Service
Full Service
Quick Service
Full Service
Quick Service
Full Service
Quick Service
Major Service |
Repeat from 4,000 km interval. | 2004 and Later
1,600 km
8,000 km
16,000 km
24,000 km
32,000 km | Initial Service
Full Service
Full Service
Full Service
Major Service |
Repeat from 8,000 km interval.
We strongly recommend that, for most riders,
the 2003 and earlier maintenance schedule
be followed for ALL year model vehicles! |
* This is intended to describe in general what is included in each type of maintenance. Requirements vary by model and year. The specific maintenance requirements list for your vehicle is found in your owners manual. Subject to change without notice.
For the Traveller!
Lube & Scoot
Engine Oil
&
Filter Change
&
Visual Safety Check
Including
Bike Wash!!
$150.00
(Condition Apply)
If your between Services and want to check that all is going well and your bike is safe, or just passing through and want to change the Oil & Filter, Drop in say Hello and have a Lube & Scoot!
Your Freedom Is Not Free!
Thank A Soldier!
Contact Details: PH: 07 4771 2200 / Fax: 07 4772 0120 leeroy@townsvillecustomcycles.com.au |
